The FORCE USA combo is perfect for total leg development. From the hips to the calfs your lower body will be worked through its full range of motion. Build massive legs with this combo.Rated for Light Commercial use so is perfect for PT studios or Corporate settings.

 Features:

•  Easily converts from leg press to hack squat positions
• Easy pull pin adjustment to switch from leg press to hack squats in seconds.
• Laser cut range-of-motion adjustments enables multiple start positions.
• Adjustable foot plate and back support for proper leg alignment.
• Oversized foot plate for various leg exercises and correct foot positioning during intense workouts.
• Includes built in safety catches for added safety during your workout.

• Solid guide rods provide a safe workout with maximum weight capacity of 455kgs or 1000lbs
• Self-aligning Linear Bearrings provide an ultra smooth workout!
• Heavy duty steel construction.

• Quality bracing for correct body alignment throughout your workout.
• Great for rehabilitation or any other workouts.
• Quick and easy adjustments.

• SteelForce™ Structural Integrity – Built to last high quality heavy-guage steel that supports even the toughest of workouts.
• DuraCore™ High Density Foam Padding – Strong and durable high density gym quality foam padding.
• VorTex™ Upholstery – Commercial grade upholstery which has a rip-stop feature.
• EcoCoat™ – Environmentally friendly powder coating.

• Sewn Seats – Not only do they feature VorTex Upholstery, they look nicer too. Sewn seats are more comfortable and will last longer than vinyl seats that are just stretched or stapled on.

• Class A, Light Commercial Lifetime Structural Replacement Warranty along with 2 years parts warranty  

Price:$ 1,699.00

 These stands are for use with free weight training.  

 • Commercial quality (welded upright for maximal strength)

     • Many incremental adjustments for the perfect height required for your exercise

     • Weight holder on back for extra storage

     • Dip handles included as standard (slightly angled so very ergonomic)

     • Quick change bar holders and safeties (stronger than telescopic design)

     • Adjustable width squat stands

Price:$ 599.00

• Extension arms offer 150-degrees of high-to-low
vertical adjustments and 165-degrees of side-to-
side horizontal adjustments
• Available with 2:1 weight ratio for fitness
facilities, or 4:1 weight ratio for rehabilitation or
wellness training
• Independent movement for bilateral and
unilateral training, one or two users
simultaneously
• Wide base frame area easily accessible foe
wheelchair, rehab equipment, workout benches
and stability balls
• Hydraulically supported arms for easy and safe
vertical adjustments
• Resistance loads available in 2.5 lbs. or 5 lbs.
increments
• Two (2) 200 lbs. steel weight stack
• Commercially rated 

Price:$ 99,999.00

• Compact and space efficient design
• Extension arm offers 150-degree (15 positions) of "high-to-low" vertical adjustments and 165-degree (5 positions) of "side-to-side" horizontal adjustments
• Hydraulically supported arms for easy and safe vertical adjustments
• Wide-base frame area easily accessible for wheelchair, rehab equipment, workout benches and stability balls
• Swivel double-pulley bracket design offers a wide variety of functional and sport specific exercises
• 200 lbs. weight stack
 

Price:$ 99,999.00

• Fully adjustable high/low cable pulley system with a pivot range of 180-degree
• Integrated dual swivel and free moving nylon handles
• 4-way corner bracing and wide base for greater stability
• Built-in wide and narrow grip chin-up bar
• (2) 200 lbs. weight stack
 

Price:$ 99,999.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 3,299.00

• Single point arm movement with rotating hand grips provide smooth and uninterrupted downward motion
• Gas assist angled back pad adjustment to ensure torso stability
• Dual-linkage gas assist seat adjustment
• 220 lbs. steel weight stack/110 lbs. resistance

Price:$ 99,999.00

• Adjustable thigh hold-down pads provide stability and firm support during workouts
• Unique range of motion device for adjusting the 3 starting positions by lowering or raising the lat bar
• Spring locking pin allows the user to interchange bars or handles easily
• 200 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

• Computer imagery and geometry determined the correct angle of the bench ensuring accurate level biomechanical motion
• Heavy duty diamond footplates
• Large diamond floor plates for structural stability and other low pulley exercises
• 200 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

• 360-degree articulating hand grips provide a defined and natural path of motion
• Diverging press arm movement
• Gas assist chest support adjustment
• Dual-linkage gas assist seat adjustment
• 300 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

• Rotating hand grips allow control and continuous resistance throughout the range of motion
• Counter-balanced at 0 lb. starting position
• Dual-linkage gas assist seat adjustment
• Ergonomically designed arm rest for maximum support and comfort
• 200 lbs. steel weight stack/100 lbs resistance

Price:$ 99,999.00

• Unique handle design permits grip changes to isolate the deltoid muscles
• Converging press arm movement
• Dual-linkage gas assist seat adjustment
• Pre-stretch foot lever for start and end position
• 300 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

• Unique L-arm with dual pivot points allow user to maintain perfect form throughout the range of motion
• Adjustable fly arms for comfortable start position
• Swivel handles with rotating grips provide proper hand positioning and less wrist movement
• Dual-linkage gas assist seat adjustment
• 200 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

• Unique dual pivot points on the pectoral fly arms allow user to maintain perfect form throughout the range of motion
• Gas assist seat height adjustment
• Pre-stretch foot lever for start and end position
• 200 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

Unique pivoting bench seat design with multiple forward positions to accommodate most arm lengths
• Patented RAC technology allows natural converging press arm movement
• Dual-linkage gas assist seat adjustment
• Convenient foot assist 12" pre-stretch foot lever for start and end position
• 300 lbs. steel weight stack/200 lbs. resistance

Price:$ 99,999.00

• Space efficient design with an exceptional wide base workout area to accommodate a variety of exercises and bench workouts
• Dual-action swivel handles pulley system
• Adjustable from high, mid and to low positions
• Designed for wheelchair accessibility
• 150 lbs. (200 lbs. optional) steel weight stack (1:1/2 ratio - half the resistance)

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 2,799.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 2,999.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 2,799.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 2,999.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 2,999.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 3,199.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year
• Hand grips, upholstery pads and rollers, all other parts (including end caps, shrouds): 6 months

Price:$ 2,899.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year

Price:$ 2,799.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year

Price:$ 2,599.00

• Accommodating-isolateral movements accommodates single arm exercise, sound biomechanics offers smooth movement following your body.
• Compact - space efficient design requires minimal floor space.
• Easy-to-use - minimal adjustments and pre-stretch features allow for optimal exercise positions.
• Attractive - race track tubing offers streamlined look. Sleek design and quality materials make for a customer attraction.
• Convenient - 2 drink and accessories trays conveniently located at the top of the weight stack tower.
• Instructive- simple, step-by-step instructions and training tips help users get the most out of their exercise.

• Tubing: 2.5mm to 2.75mm, 50mm by 100 mm tubing, electro-welded to maximum integrity.
• Color: Tungsten (metallic silver gray).
• Finish: Electrostatic powder-coated and heat cured after adhesiveness enhancement pre-treatment for superior durability.

• Weight Plates: 25mm machined cast weight plates with fitted precision nylon bushings to ensure smooth operation on guide rods.
• Guide Rods: 25mmdiameter steel shafts, polished with corrosion-resistant plating for smooth operation and rust prevention.
• Weight Range: Low starting weight and full weight range accommodate a wide range of users. Weight stack can be easily reached from the seated position.
• Weight Selection Pin: Weight selection pin is yellow color-coded for easy identification.Magnetic weight selection pin assures positive locking to plates and is secured to weight stack with techer.
• Cables: Aircraft spec 5mm AmericanLoos cable with a 4,200 lb breaking strength. End fittings tested to 250,000 cycles using full weight stack.

• Handles: Slip resistant custom-molded rubber grip assembly with machined alloy end-cap and retaining ring.Push grips are over-sized to 39mm diameter. Pull grips and handlebars are over-sized to 32mm diameter for optimal gripping.
• Starting Position Adjustment: Hardenedspring-loaded snap-pin assembly with easy-to-grip pull handle for smooth position adjustment. Pull handle is yellow color-coded for easy identification.
• Seat and Back Pad Adjustments: Custom-molded sleeve-tube inserts in between inner and outer tubinginsures stable, low friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is yellow color-coded for easy identification. Viewing window and etched numbers on sleeve-tube for accurate positioning of seat and back pad.

• ABEC-rated bearings for added durability and smooth feel.
• Glass fiber reinforced nylon pulleys with deep V-groove provides secure cable seating and fluid bearing rotation.
• Size: 4.5’’ (11mm)

• Pillow block motor grade rotary bearings provided on machines with a cam assembly (Arm Curl, Leg Extension, Leg Curl, Abdominal, and Back Extension).
• Axles: 25mm solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement.

• Fabric: Premium quality, industrial vinyl with protective coating results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds universal fire regulations.
• Construction: 4-piece design with 19mm thick plywood backing, followed by 38mm thick foam core, covered by industrial vinyl, total thickness is 60mm.

• Weight stack tower top covers secure the pulley mechanism, and include 2 accessory trayswith bottle holders for both user and bystanders.
• Translucent high density hardened plastic shrouds enclosing the back of the weight stack.

• Machines are packaged partially pre-assembled to save time and eliminate steps.
• On average, assembly requires installation of 30 bolts or less.
• Assembly guide clearly instructs installation steps and tips. On average, assembly takes 2 people about 30 to 45 minutes.

• Main frames: Life time
• Moving arms: 2 years
• Weight stack plates and components, rotary bearings, bushings and pulleys: 2 years
• Cable, linear bearings, springs, adjustments: 1 year

Price:$ 2,799.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00

• Stainless steel guide rods resist rust and stay smooth
• Spring-lock knobs make cushion adjustment a snap
• Heavy duty vinyl cushions are available in two colour choices
• Direct drive dual cam system eliminates slack and provides the best action and feel in its class
• Internally lubricated steel aircraft cables provide quite, smooth operation.
• Magnetized weight selector makes for instant, secure selection of weights.
• Deep-groove, 5-inch shrouded pulleys provide faultless belt tracking.
• Cold rolled steel weight stacks with noise dampening

Price:$ 99,999.00